Electrochemical and semiconductor analyzers
Electrochemical analyzers are based on the application of electrochemical sensors. The preference of these sensors is their high sensitivity and excellent selectivity. Except the oxygen analyser this type of analysers is used to the measurements of very low concentrations. On request analysers of several combinations of further not mentioned gases (ammonia, chlorine, hydrogen chloride and many others) can be delivered.
Semiconductor analyzers derive benefit from the high sensitivity of semiconducting sensors to organic vapors. They are mostly used to check and control of the technologies of their disposal.
ASIN O2
ASIN O2 is oxygen analyzer based on the principle of the electrochemical sensor which is characterized by high selectivity, reliability and long operation life.
The measured oxygen concentration is displayed on a LED display and is at disposal as the current loop 4-20 mA.
The device is delivered only in the wall mounted version. The measuring range can be set according to the customer's need from 0-5% to 0-100%.
ASIN NH3
The measured oxygen concentration is displayed on a LED display and is at disposal as the current loop 4-20 mA.
The device is delivered only in the wall mounted version. The measuring range can be set to 0-100 ppm or 0 - 1000 ppm.
ASIN HC
The device is delivered only in the wall mounted version.